Cornell Iron Works - Accordion
...PROCEDURES, 01 62 00 PRODUCT OPTIONS, 01 25 13 PRODUCT SUBSTITUTION PROCEDURES, 01 66 00 PRODUCT STORAGE AND HANDLING REQUIREMENTS, 01 77 00 CLOSEOUT PROCEDURES AND 01 78 00 CLOSEOUT SUBMITTALS. IF THE PROJECT MANUAL DOES NOT CONTAIN THESE SECTIONS, ADDITIONAL INFORMATION SHOULD BE INCLUDED UNDER THE APPROPRIATE ARTICLES. THIS IS AN OPEN PROPRIETARY... See #2.
Northwest Rubber SportFLOOR ASTM Specs and Information
...installation adhesives, cleaners and sealers..4 Submit layout drawing of flooring [tiles] [sheets] to [Owner] [Consultant] [Engineer] for review prior to starting any work. 1.4 CLOSEOUT SUBMITTALS.1 Provide maintenance data for resilient flooring for incorporation into maintenance manual specified in Section [ ] – [ ]. 1.5 EXTRA MATERIALS.1 Provide... See #3.
Powerflex Xcel™ | Modular Electrical System Specifications & Testing
...01620–PRODUCT OPTIONS, 01630–PRODUCT SUBSTITUTION PROCEDURES, 01660–PRODUCT STORAGE AND HANDLING REQUIREMENTS, 01770–CLOSEOUT PROCEDURES, AND 01780–CLOSEOUT SUBMITTALS. CLOSE COORDINATION WITH DIVISION 1 SECTIONS IS REQUIRED. IF THE PROJECT MANUAL DOES NOT CONTAIN THESE SECTIONS, ADDITIONAL INFORMATION SHOULD BE INCLUDED... See #4.
CEP-Panels: Distributor of Petrarch, Fasset, and Stoneflex architectural building panels.
...treatment immediately if panels are soiled or scratched. Carry panels on edge and handle carefully to avoid damage to surfaces and corners. WARRANTY See Section 01780 - Closeout Submittals, for additional warranty requirements. Comply with manufacturer's project review requirements and notification procedures to assure qualification for warranty. See #5.
| 
