New Curved Zee-Lock Panel
1.02 RELATED SECTIONS A. Section 05120: Structural Steel Framing. B. Section 05500: Miscellaneous metal fabrication. C. Section 06100: Rough Carpentry. D. Section 07631: Flashing and Sheet Metal Gutters. E. Section 07900: Sealants. 1.03 REFERENCES A. American Iron & Steel Institute (AISI) Specification for the Design of Coldformed Steel Structural Members. See #2.
Buckingham-Virginia Slate Corp.
...place all flashing pieces, snow-guards, etc., furnished by the sheet metal contractor and cooperate with him in doing the work of flashing. (If roofing contractor has the flashing and sheet metal work under his contract, change this paragraph to suit.) (I) Upon completion, all slate must be sound, whole, clean, and the roof shall be left watertight... See #3.
Gaco Western - GW-15-U62 Specification for Urethane Waterproofing for Traffic Decks and...
...system meets the requirements of Class A rating on noncombustible substrates when tested under ASTM E-108/UL 790. 1.2 RELATED SECTIONS Cast-In-Place Concrete: Section 03300 Flashing and Sheet Metal: Section 07600 Drains, Vents, and Penetrations: Section 07700 1.3 SUBMITTALS Product Data: Submit manufacturer?s standard submittal package including... See #4.
Extruded Aluminum Walkway Covers 2004
...American Society for Testing and Materials (ASTM) 1.04 Related Sections A. Concrete Work Section 03300 B. Masonry Work Section 04200 C. Miscellaneous Metals Section 05500 D. Flashing and Sheet Metal Section 07600 E. Sealants Section 07900 1.05 Submittals A. Product Data: Submit manufacturer's product information, specifications and installation... See #5.
F.R. Walker: Estimating Resources and Construction Store
...Division 7): waterproofing • damproofing • insulation • shingles and roofing tiles • preformed roofing and siding • membrane roofing • flashing and sheet metal • roof accessories • sealants Doors and Windows (CSI Division 8): metal doors and frames • wood and plastic doors • special... See #6.
AEC Daily
...07 01 30 - Maintenance of Steep Slope Roofing 07 01 40 - Maintenance of Roofing and Siding Panels 07 01 50 - Maintenance of Membrane Roofing 07 01 60 - Maintenance of Flashing and Sheet Metal 07 01 70 - Operation and Maintenance of Roof Specialties and Accessories 07 01 80 - Maintenance of Fire and Smoke Protection 07 01 90 - Maintenance... See #7.
Bemo USA - Downloads
...and related accessories required for a complete roofing system as indicated on the contract documents. 1.2 RELATED WORK SPECIFIED ELSEWHERE (back to top) Section - Flashing and Sheet Metal Section - Sub-Decking Metal Section - Roof Insulation Section - Felt Underlayment Section - Structural and/or Light Gage Framing Section - Sealants 1. See #8.
E. Dillon & Company
***** 1. Section 07212 - Foamed-in-Place Insulation: Insulation placed in CMU cavities either during or after erection of masonry walls. 2. Section 07600 - Flashing and Sheet Metal: Sheet metal flashing embedded in masonry joints. 3. Section 04810 - Unit Masonry Assemblies: Construction of masonry walls using polished face masonry... See #9.
Tubular Skylights by Sun-Dome
B. Provide all materials required for installation with complete instructions for applications 1.02 RELATED WORK A. Section 07510 Roofing B. Section 07600 Flashing and Sheet Metal 1.03 REFERENCES A. ASTM E 330, ASTM E 331, ASTM E 283 B. SBCCI Test Standard for determining impact resistance from airborne debris. SSTD 12-97 C. See #10.
| 
