Artek Door Guide Specifications
...in accordance with requirements of the Contract Documents, a cut-away sample door, with provision for lockset and hinge, and corner section of frame. 1.04 QUALITY ASSURANCE Manufacturer Qualifications Provide doors and frames manufactured by a firm specializing in the design and production of standard and custom Hollow Metal steel doors and frames. See #2.
Section 08800 - Insulating, Tempered, and Spandrel Glass and Glazing
2. Each type of patterned glass. 3. Coated vision glass. 4. Ceramic-coated spandrel glass. 5. Insulating glass for each designation indicated. 1.3 QUALITY ASSURANCE A. Manufacturer Qualifications: Single firm with minimum 5 years successful experience in the fabrication of glass. 1. Glass of type required for this project must be a certified... See #3.
3 Part Specs
...product data and installation instructions. B. Samples: Submit one full-size snow-guard in color and material selected for approval. 1.03 QUALITY ASSURANCE A. Manufacturer Qualifications: Provide snow-guards manufactured by a company with at least 20 years experience in manufacturing snow-guards. 1.04 DELIVERY, STORAGE, AND HANDLING A. See #4.
All Star Bleachers, Inc. Product Specs.
1.02 Quality Assurance Manufacturer: ALL STAR Bleachers, Inc. 6550 New Tampa Highway, Lakeland, FL 33815-3148 (800)875-3141 or (863)687-3141 FAX:(813)628-4254 Manufacturer Qualifications: Manufacturers must have ten years of experience in the manufacture of bleachers and grandstands; welders must be AWS certified; manufacturing... See #5.
Alumiseal: Sample Architects Written Specifications
Applicator Certificates: Signed by manufacturer certifying that the applicator complies with requirements. 1.5 QUALITY ASSURANCE Manufacturer Qualifications: Engage a firm experienced in manufacturing sheet vapor barrier similar to that indicated for this Project and with a record of successful in-service performance. See #6.
Skylark Shelter Systems - Standard Specifications
** NOTE TO SPECIFIER ** Delete the paragraph if not required. 1. Owner will furnish geotechnical report showing soils analysis for site. B. Manufacturer Qualifications: Firm with at least 5 years experience in design and manufacture of pre-engineered shelters and: 1. Active AISC member. 2. Demonstrable experience... See #7.
Solar Control Devices Brochure
Identify the moment and shear forces transferred to the structure or supports through the installation connections. 1.05 QUALITY ASSURANCE Manufacturer Qualifications: At least ten years experience in the design, fabrication, and erection of sun control devices. Installer Qualifications: Have sun control devices... See #8.
Dyplast Products Polyisocyanurate Roof Insulation Specifications
F. Thermal Warranty: Submit sample warranty indicating conditions and limitations. 1.6 QUALITY ASSURANCE A. HCFC FREE Green Polyiso Manufacturer Qualifications: 1. Show evidence of ability to manufacturer products specified with sufficient manufacturing facilities. a. List dates of HCFC FREE Green Polyiso... See #9.
| 
