Cleaning/Sealing
...surfaces, this will typically need to be done every 3-5 years to maintain your surface like new. Sealing is necessary for all concrete surfaces to prevent spalling from application of salts and keep them protected from stains and chemicals. Your sealed surface will also resist oil from penetrating the slab, making cleanup easier. For outdoor... See #5.
News Release
...of concrete products, an unpredictable, temporary change in appearance, known as efflorescence, occasionally takes place. Efflorescence, appearing as a white haze, is caused by free salts in the raw material coming to the surface of the product via water through concrete pores. The length of time efflorescence remains, when it occurs, varies... See #6.
Follansbee - TCS Satin - Stainless Steel Roofing
The warranty shall then be limited to a period of ten (10) years from the date of sale. Direct exposure of TCS Satin to sea spray, abrasive particles and chloride-containing salts is not recommended. THIS WARRANTY DOES NOT APPLY IN THE EVENT THAT: The TCS Satin product was applied over any decking material or underlay materials that... See #7.
MG Piping Products Co. - Corrosive Study - Page 1
ACIDITY (PH) A neutral soil (PH-7.0) is least corrosive. A soil with a PH of 3.0 would be very acidic and corrosive. Alkaline soils (PH above 7.0) contain dissolved salts which can accelerate corrosion. This is especially true in desert soils. PARTICLE SIZE Large soil particles can allow oxygen to penetrate to the buried metal product. See #8.
Elsro Inc. - Bridgemate
Because of our unique inter-locking system, only ONE layer of Bridgemate is required to provide extreme resistance to ballast rock penetration. In addition, salts do not cause any breakdown of the product. It surpasses the ASTM D517 specifications for protection course materials for rail bridges and provides the ultimate... See #9.
Akzo Nobel CCNA Extrusion Products
It also puts an approved chemical treatment, chrome or (non-chrome in some instances), on the metal to promote adhesion of the paint and deter the formation of salts or corrosion. On some lines this is done as part of the process on-line and in some cases it is done off-line with the same basic chemicals only applied by... See #10.
Glass Gallery
Back to Glass Options Previous Next Iridescent Description: A shimmering rainbow-like finish created on cathedral glass by coating the surface with an ultra-thin layer of metallic salts. Standard Thickness: 1/8" (3mm) Standard Colours: Clear Not Available Tempered Not Available Bevelled. See #11.
Salt efflorescence | Products | Solutions with Paint
Salt efflorescence: common problems salt efflorescence symptoms a white salt deposit appears, usually on plywood or brickwork. cause occurs with some plywoods excess salts migrate to surface through coating solution clean down. may re-occur. apply freshen up coats if necessary. See #12.
Applications: Copper Compounds
In addition to their many uses in agriculture and biology, copper salts have an astonishing variety of industrial uses, chiefly of a specialised nature, and there is hardly an industry which does not have some small use for them. See #13.
Vanton Pump & Equipment Corp. - Library/Tips
Thermoplastic Pumps for Corrosive Chemicals, Acids, Caustics, Salts, Chlorides, Halogens, Ultrapure Water and other Aggressive Process and Waste Fluids. See #14.
Question 10 - Midwest Industrial INC
10. Will it harm my roads?
No. Unlike salts or other water soluble products, it will actually help stabilize the road rath. See #15.
Organophosphonium salts in Industrial for Rohm and Haas
Organophosphonium salts in Industrial for Rohm and Haas. See #16.
| 
