Finishing Stairs - Guidelines on how to finish your wooden stairs and stair railings by...
...sanding with the grain and get a feel for it. 2. Take a small rectangular piece of wood now examine the piece and look for the edge that has the growth rings. That is called the butt edge or the end grain. Now take that edge put a piece of tape half way and sand 1/2 of it with 80 grit, and the other half with 120 grit, then 220 grit and then... See #2.
A Guide to Builders Hardware Terminology
...causes it to close from an open position or open from a closed position. They are not listed for use on fire doors. Half Mortise. When one hinge flange or leaf is mortised into the butt edge of the door and the other to the surface of the frame. Half Surface. When one hinge flange or leaf is fastened to the surface of the door and the other... See #3.
Elsro Inc. - Bridgemate
Adhesives are not required on the deck. Because of the unique inter-locking system only one layer is required to provide extreme resistance to ballast rock penetration. Bridgemate Butt Edge Two-Ply System -- The first layer of Bridgemate is laid dry directly on the waterproofing membrane with each tile butted tightly to the next. The second... See #4.
| 
