RainGuard - Water Proofing Systems
...common deficiencies in sheet metal caps and their solutions: I. "Skirt too short". For proper protection the sheet metal must extend a minimum of two inches over the masonry surface front and back. In practice three inches is preferred to allow for normal tolerances. This is particularly important when using split-face units to avoid... See #5.
IPA Systems
...the surface permeability of porous materials such as limestone or sandstone and air-entrained concrete, and forms a water repellent barrier. Once it has penetrated into the masonry surface, DURIPAL reacts with free lime to form calcium silicate. It also reacts with other soluble salts and lime, minimizing and reducing efflorescence. Chemical:... See #6.
Diedrich Technologies
Vapor permeability is not affected nor ability to dry. Surface life of application extended, damage caused by moisture trapped in masonry prevented. Total penetration of the masonry surface, natural appearance of the masonry will not be altered. Rapid formation of surface repellency, resistance to driving rain occurs quickly. Diedrich 303S... See #7.
Firma Plug Leakstopping Hydraulic Cement
Firma Plug Hydraulic Cement Stronger than concrete! Leakstopping A fast setting, expandable compound that instantly stops active water leaks in masonry surfaces. Sets hard in 3-5 minutes. Stronger and more dense than concrete, it can be used to repair any masonry surface. Available in 2.5 Ib., 10 Ib., and 50 Ib. pails. Site Navigation. See #8.
Penetrating - J-27 WB Weather Worker WB Heavy Duty
Dilution prior to application is not required. Weather Worker WB Heavy Duty penetrates the substrate, and chemically reacts with, and bonds to, the concrete or masonry surface. The invisible film formed by Weather Worker WB Heavy Duty will ?bead? water and protect the substrate many times longer than conventional coatings.... See #9.
Penetrating - J-27 WB Weather Worker WB Heavy Duty
Dilution prior to application is not required.
Weather Worker WB Heavy Duty penetrates the substrate, and chemically reacts with, and bonds to, the concrete or masonry surface. The invisible film formed by Weather Worker WB Heavy Duty will ?bead? water and protect the substrate many times longer than conventional coatings. See #10.
Standard Configuration Guide
Standard Unit Exclusions: Some models are designed for a 30” masonry base wall with two pressure treated 2 x’s structurally anchored to the masonry surface, resulting in a base wall with an overall height of 33”. (The base wall is provided by a third party.) The structural curb and curb sub-flashings... See #11.
EaCo Chem Inc. | Graf-Ex non-hazardouse graffiti remover
*Surface & Air Temperatures Do not clean when temperatures are below freezing or will be overnight. Best cleaning results are obtained when air and masonry surface temperatures are 40 deg. Fahrenheit or above. If freezing conditions exist prior to application, allow adequate time for masonry to thaw. *Pre-Testing... See #12.
| 
