AEC-CADinfo
Free Engineering Publications
Computer-Aided Design
Architecture / Engineering / Construction
News and Information on AEC-CADinfo

Directories
 
AEC Software News
 
 
Search
Google
web this site
News/Publications
 
Services
 
 
 

You are here:  Homepage  >  non-sag

Non-sag

Tri Lite RMS Board | Products
...Easy to Install Superior Sound Absorption 10 Years Limited Guarantee Lightweight TRILITE RMS in Painted embossed surface patterns available in 6mm thickness. Attractive, modern and non-sag superior performance. 6712 6732 6752 6782 Surface patterns in ARTCOTE Paper laminated with TRILITE 6mm. 6833 6868 Surface patterns in PVC VINYL embossed laminated with TRILITE 6mm. See #1



IPA Systems
...of IPANOL GEL permit multi-purpose uses such as anchoring pressure injection ports for concrete repair, spackling, and anchoring applications such as bolt grouting. Advantages: Non-sagging consistency Easy mixing ratio of 1 to 1 (A: B) Fast setting High early strength in 24 hours Insensitive to moisture before, during and after curing Provides... See #2

The Rucsoe Company Construction Materials
...you don't have to repeat the process time and again to make sure a project has been done correctly. Ruscoe products include: 12-1 Seam Sealer / 12-3 Self Leveling Sealant / 12-4 Non-Sag Sealant - Three different consistencies of nitrile rubber sealant designed to accomplish slightly different building construction projects. Ruscoe Professional... See #3

Color Matched Masonry Repair and Coating Compounds - Edison Coatings, Inc.
Product is not formulated for fast set or rapid hardening, permitting fine tooling, carving, shaving, grooving or sculpting in the period following initial set. Standard RL-1 non-sag consistency allows unsupported build-up of up to 2" on vertical surfaces without sagging, up to 1 inch on overhead applications. Optional RL-2 superplasticized... See #4



Industrial Polymers Corporation-Spray-on Molding Gels
...with specialized spraying equipment capable of pumping, mixing and spraying 2 component urethane products. After machine mixing, SprayGel 40™ and UraGel 760™ immediately thicken to a non-sag consistency for application onto ver tical or overhead surfaces. They are formulated for application with a simple low pressure-dispensing machine. Clean... See #5

Patching/Repairs
...For Patching, Waterproofing, Sealing, Bonding, Joining, And Coving. A-H Epoxy Patch #122 has a multitude of uses for construction and maintenance projects of all kinds. Because it is non-sagging, it is suitable for vertical and overhead applications. It can be used as a mortar adhesive for bonding tiles and as a patching material for filling... See #6

Pacific Polymers
... brush grade, sprayable non-fibered, emulsion-brush, zero voc free, aliphatic, aromatic, elastomeric sloping material, fiberglass reinforced, coaltar-free, iso-cyanate free, non-sag, below grade mortar bed tile, acrylic, splatter coat finish, high tensile, asphalt-based, silane, resin, waterbased, reservoir grade, solids, spec guide, ... See #7

Geocel Corporation - Manufacturer of Quality Sealants, Caulks, and Adhesives Designed for...
...Seal RP-400® Plastic Wet-Dry Surface Roof Cement 3500™ Roof Tile Adhesive/Sealant One-part urethane moisture cure sealant CARB VOC compliant Meets TT-S-00230C, Class A Non-sag, ASTM C920, Type S, Grade NS, Class 25, NT, A & M, CAN/CGSB-19, 13 Canada 50-year durability rating Both bonding and sealing applications Fast set-up, no... See #8

Unitex Product Line
18-0.76 mm Structural adhesive for concrete, masonry, metal, wood, etc. Vertical anchoring of rebar, dowels and threaded rod. Product Information MSDS Test Data Pro-Poxy 300 Fast Non-sag, injectable anchoring gel 9002 22 oz. (600 ml) 37 cu. in. (600 cm 3 )   9288 8.5 oz. (250 ml) 14 cu. in (230 cm 3 )   Features: Permitted for use in wet... See #9

Arrowspace Glass
15cm) Relative humidity % 100 Temperature °C 38 Color Part A Black Part B White Service temperature, maximum 170°F Mix ratio By weight 100:5.6 By volume 100:8 Consistency Non-sag Extrusion rate at 30 psi, g/min 300 Application life at 75°F, 50% RH minutes 10-30 Cure time, hours 1 1/2-3 Surface preparation Glass: To obtain good adhesion, ... See #10

Allegro Cement Coating
Allegro can be applied with a garden sprayer, airless paint sprayer, paint roller or brush. Allegro adheres like cement, providing excellent grip but with superior non-sag properties. Allegro cures faster than paint dries, so a second coat can be applied almost immediately after the first. Faster start-up and curing means scaffolding... See #11

Joint sealing and adhesive systems to fill your crack.
Data Sheet MSDS POLYURETHANE SEALANT Sika www.sikaconstruction.com Sikaflex 1A Premium -grade, high-performance, moisture-cured, 1-component, polyurethane-based, non-sag elastomeric sealant. Data Sheet MSDS Sikaflex 15LM - Low-modulus, high-performance, 1-component, polyurethane-based, non-sag elastomeric sealant. Data Sheet... See #12

Floor Joint Fillers - Concrete Construction Chemicals from nox-crete
Product Data Sheet - English Version Product Data Sheet - Spanish Version High-Mod 602LD High strength, moisture insensitive, solvent free, high modulus, non-sag epoxy gel. Ideal for use as a static joint filler in correctional institutions or as a vertical/overhead surfacing compound or adhesive. Product Data Sheet... See #13

1: http://www.triliteboard.com [c741641]
2: http://www.IPASystems.com [c1176270]
3: http://www.ruscoe.com [c1150131]
4: http://www.edisoncoatings.com [c553278]
5: http://www.industrialpolymers.com [c1085917]
6: http://www.anti-hydro.com [c1170029]
7: http://www.pacpoly.com [c925992]
8: http://www.geocelusa.com [c861325]
9: http://www.anchsand.com [c982336]
10: http://www.arrowspace.net [c928547]
11: http://www.lahabrastucco.com [c1141082]
12: http://www.smionline.com [c1093473]
13: http://www.nox-crete.com [c184954]