Pool-Depot.com - your source for swimming pool parts, pool supplies, pool equipment and pool...
...be a chemical that removes dissolved metals from water. Leslie’s Stain & Scale Shock Treat The practice of adding significant amounts of an oxidizing chemical (usually non-chlorine oxidizers such as sodium persulfate or potassium peroxymonosulfate) to the water to destroy ammonia and nitrogen compounds or swimmer waste. Shock treat used to mean... See #2.
Hydrophilic(Gel HF Acc) - Urethane Grout Technologies - PYCOSA Chemicals, Inc
...temperature in closed containers under normal storage and handling conditions. Hazardous Polymerization: can not occur. Incompatibility: Is incompatible with strong acids and strong oxidizers. Hazardous Products of Decomposition: Thermal decomposition can produce carbon monoxide (CO)and oxides of nitrogen. May form peroxides of unknown stability. See #3.
Air Handling
...baked phenolic coatings will withstand exposure to practically all corrosive atmospheres with the exception of strong alkalies such as potassium and sodium hydroxide, strong oxidizers such as aqua regia and wet bromine, chlorine and fluorine in concentrations greater than 100 ppm. Because the resistance of HERESITE is dependent upon conditions... See #4.
HMIS® III
...more information about a chemical's physical hazard(s). The specific physical hazards that the Hazcom addresses are flammability, compressed gases, explosives, organic peroxides, oxidizers, pyrophorics, unstable-reactive and water-reactive chemicals. The new HMIS® III not only specifically incorporates each hazard, with specific criteria... See #5.
Properties
...polar, aprotic solvents like dimethyl formamide (DMF), dimethyl acetamide (DMAC), N-methyl pyrrolidon (NMP) or concentrated sulphuric acid dissolve P84. P84 is sensitive to strong oxidizers like nitrogen dioxide at elevated temperatures. Strong concentrated aqueous acids such as hydrochloric acid, sulphuric acid or concentrated aqueous Lewis... See #6.
Weld-Crete MSDS
...imparts a milky white color to contaminated waters. Foaming may result. Wear protective clothing, boots, gloves, and eye protection. Handling and Storage Storage Keep away from oxidizers. Avoid freezing temperatures during storage. Minimize contact with atmospheric air to prevent inoculation with microorganisms. Do not store in iron or other... See #7.
www.compotite.com
...AVOID Keep away from heat, sparks, open flame and other sources of ignition. INCOMPATIBILITY (MATERIALS TO AVOID) Caustics, ammonia, inorganic acids, chlorinated compounds, strong oxidizers and isocyanates. HAZARDOUS DECOMPOSITION PRODUCTS When forced to burn, this product gives out carbon monoxide, carbon dioxide, hydrogen chloride and smoke. See #8.
Dotcalm Industrial Tools - Chemical Equipment
...Construction Materials - includes fabricators, generators, pipe, wire, gaskets and cements. Environmental & Pollution Control Equipment & Services - includes combustion equipment, oxidizers, thickeners, silencers and dust collectors. industrial tools home | contact | resources | sitemap | services a Copyright ® 2008 | Dotcalm Industrial... See #9.
I - ENVIRONMENTAL GLOSSARY
...Code, IMO Classification The IMDG (International Maritime Dangerous Goods) Code assigns divisions, classes, and codes to materials in shipment. These are explosives, flammables, oxidizers, poisons, corrosives, and other regulated substances. The code also assigns labeling and the DOT UN/NA and Pins. (International Maritime Organization, 4... See #10.
MSDS FOR REG SF FOR PARTS MASTER
...SECTION FIVE - REACTIVITY DATA STABILITY: Stable, avoid open flames and high temperature (above 120°F) and direct sunlight. INCOMPATIBILITY: Strong oxidizers, selected amines, strong acids or bases. HAZARDOUS DECOMPOSITION PRODUCTS: Carbon oxides can form on incomplete combustion. HAZARDOUS POLYMERIZATION:... See #11.
MSDS 207A, 208A, 219A
Numbers cited are for asphalt coating. SECTION 5. REACTIVITY DATA STABILITY/CONDITIONS TO AVOID: Stable INCOMPATABILITY/MATERIALS TO AVOID: Avoid contact with strong oxidizers HAZARDOUS POLYMERIZATION/CONDITIONS TO AVOID: Will not occur HAZARDOUS BYPRODUCTS OF DECOMPOSITION: Carbon monoxide, carbon dioxide, aldehydes, and other... See #12.
Acrylabs 3200 Series Coatings (Rust Inhibitive Primer)
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide, acid fumes, lead oxide, toxic gases. Hazardous Polymerization: Will not occur. Incompatibility: Oxidizers, acids, bases. Alkalis aluminum, metals, peroxides, nitric acid, magnesium. Chlorinated rubber. SECTION VII: HEALTH HAZARD DATA Acute Eye: Irritation of eyes. See #13.
Fusion Environmental - Thermal Oxidizers
Fusion Environmental Corporation (FEC) is a manufacturer of Thermal Oxidizers, including Regenerative Thermal Oxidizers, Recuperative Thermal Oxidizers, and Direct Fired Thermal Oxidizers. In addition, FEC also... See #14.
John Zink Institute: Thermal Oxidation/Oxidizers
The courses are intended for engineers, operators and maintenance personnel who deal with hazardous and non-hazardous organic waste disposal in their daily operations. See #15.
|
