ShotGard
...shall be covered with wood trim to match door veneer. 4. The threat-side glazing stop shall be welded to the door so that it cannot be removed.] 2.05 FINISHES A. Frames: Provide shop-applied primer after fabrication: 1. Primer: Rust inhibitive paint suitable as a base for finish paints. 2. Prior to shop painting, surfaces shall be cleaned with... See #2.
1
...5005-H34 alloy meeting ASTM B209; minimum 0.040” thickness. C. Finish: 1. Aluminum components and components to which exterior sealant is applied: a. **Two-coat, three coat**, shop-applied, 70% resin, baked-on fluoropolymer coating system based on Atofina, Kynar 500 or Ausimont U.S.A., Inc. Hylar 5000 resin. b. Color: **Standard, ... See #3.
Specification - Long Form
Section _______________ Sealants 1.03 SYSTEM DESCRIPTION A. The system consists of veneer panel 3/8" (9.5mm) Thin Reinforced Granite with an extruded aluminum framing system shop-applied to the back of the veneer panel. B. The system shall incorporate a positive mechanical attachment connecting the stone veneer to the frame as well as a... See #4.
| 
