www.a-s.com
...structural system due to action of an earthquake. 2.2.9 Floor (mezzanine) Live Load: The load induced on a floor system by occupants of a building, furniture, equipment, walls, stored materials, etc. SECTION 3. BASIC MATERIAL SPECIFICATIONS 3.1 PRIMARY FRAMING STEEL 3.1.1 Steel for hot-rolled shapes shall conform to the requirements of ASTM... See #2.
productdetail
...air circulation then thoroughly mixes the air to maintain uniform room temperature. This uniform room temperature eliminates the possibility of condensation forming on stored materials because of uneven room temperature. Cold air from open doors in shipping and receiving areas becomes less of a problem with an Air Turnover unit. Temperature... See #3.
srsspec
...regarding weather, substrate and other project conditions. Do not install the paving slabs or adhesives during freezing weather, or on a frozen surface. B. Protect all stored materials and installed work from possible damage by other trades. 1.08 SEQUENCING AND SCHEDULING: A. Coordinate the sequencing, scheduling, and installation of... See #4.
SPECIFICATIONS - PLYWOOD DECK WATERPROOFING
Store materials as specified by the manufacturer in a clean, dry, protected location and within the temperature range required by manufacturer. Protect stored materials from direct sunlight. Remove and replace material that cannot be applied within its stated shelf life. PROJECT CONDITIONS Protect all adjacent areas not to be installed on. See #5.
Denstor - Mobile Store Systems - series 100
Fixed main aisles provide virtually unlimited access to stored material by multiple members of personnel. Space savings up to 40%. More than one-half of stored materials are exposed at all times. Retrieval times enhanced by placing more material along main aisles. Optional foot stops secure shelving units to prevent unintentional closing. See #6.
Concrete form alignment braces at KwickerKicker.com
...page for a break down on the numbers. Use KWICKER-KICKERS™ patent pending Retractable Form-Alignment Braces on all your poured in place needs. ELIMINATE moving stored materials or cutting lumber for a one use brace location. Install easily in tight places. Use in one inch increments. Cut down on injuries caused from handling... See #7.
Warranty
...other materials must be in a dry place out of the sun and other elements. Exposure to the sun, rain and other elements can cause warping, staining and other damage. Temporarily stored materials should be placed on blocks well off the ground and separated to allow air circulation around. See #8.
high density shelving, and racking for storing small parts and larger heavy items for...
Carriages can hold many thousands of pounds of materials in a fraction of the space of static shelving, is lockable, and can help protect stored materials from light and other ambient factors. See #9.
| 
