AEC-CADinfo
Free Engineering Publications
Computer-Aided Design
Architecture / Engineering / Construction
News and Information on AEC-CADinfo

Directories
 
AEC Software News
 
 
 
Search
Google
web this site
News/Publications
 
Services
 
 
 

You are here:  Homepage  >  support member  >  support members

Support members

Please find below a selection of relevant articles from AEC companies and organizations for support members.

Aluminum/Plywood Scaffolding Walkboards - WalkBoards from ScaffoldMart
451(b)(7) ] On scaffolds where platforms are abutted to create a long platform, each abutted end must rest on a separate support surface (this does not preclude the use of shared support members such as "T" sections, hook-on platforms that rest on common supports, etc.). [ 1926.451(b)(6) ] When platforms must overlap because a scaffold... See #1.



Power Lift Foundation Repair
...repair services for both residential and commercial structures. These services include the addition and replacement of wood floor joists, stringers, box sills, and various wood support members that have allowed floors and walls to settle. This often includes the replacement of rotten and termite damaged wood. CONCRETE PUMPING: These services... See #2.

Control Air
...diffusers do not restrict air flow; you get all the air you designed for, all the time. The fans section is constructed of galvanized steel panels welded to structural steel support members. Fan compartment has hinged access to allow maintenance of motor and drives, and a single centrifugal fan designed to meet the type, Class and Discharge... See #3.

Requested Spec
...unit will be supported by die formed fittings(rated at 2000 lbs per connection). Die formed fittings are spaced at 10'-0 o.c. maximum and shall conform to building structure support members (provided by others). Each rotating mechanism is connected to the fittings with two (2) ˝" all thread rods which supports the 2 3/8" o.d. drive pipe. See #4.



Specification - Long Form
795 Structural Silicone used in continuous 1/4" x 1/4" double beads along all perimeter frames and intermediate stiffeners. D. Extruded aluminum frames, stiffeners, and support members shall be 6105-T6 alloy. Aluminum in contact with structural silicone shall have alodyne finish. 2.04 WEATHERSEAL: Wherever touching the granite fascia, ... See #5.

product detail
Components “telescope” into one another and provide double-wall construction and a precision fit. The frame includes diagonal and horizontal support members bonded to the media on the air entering and leaving sides for unsurpassed frame strength, locking corners and positive media-to-frame seal reduces the possibility of air bypass. See #6.

ROOFING: ACCESSORIES
...pitch or more and on long runs because of their ability to waterproof the structure. These systems are specifically designed for spanning roof purlins (structural support members) and rafters at various spacings. Englert panels may not be used on a flat roof – there must be enough slope to prevent ponding. See #7.

Filler King Company
Square ends and end matching is available up to 24'. CSI FORMAT SPECIFICATION Click here (.pdf format) Fastening and Nailing Schedule: Decking to support members (each piece each crossing): 2" Deck - (2) 12d common or ring shank 3" Deck - (2) 20d common or ring shank 4" Deck - (2) 60d common or... See #8.

1: http://www.scaffoldmart.com [c1155764]
2: http://www.foundationspecialists.com [c1014133]
3: http://www.isomix.com [c862993]
4: http://www.adplemco.com [c1169601]
5: http://www.thinstonesystems.com [c927102]
6: http://www.flanderscorp.com [c886584]
7: http://www.englertinc.com [c923842]
8: http://www.fillerking.com [c1030624]

 





Copyright © 2004-2008 Actiosoft / Digital Business Media: compilation of news, articles, white papers and web references concerning support members.