Please find below a selection of relevant articles from AEC companies and organizations, including Baltimore Aircoil Co., Duncan Galvanizing Corp. and DriTherm, Inc., for corrosion protection system.
Add your web page here?
Please send your link and description (at least 20 words) to addpage@cadinfo.net. Placement is free. We reserve the right to refuse or modify your contribution.
DriTherm International Inc.
...MS Sandia National Laboratories Pennsylvania State University "The excavated lines were installed about five years earlier using ‘DriTherm’ as the insulation/corrosion protection system. We were surprised, and delighted, to discover the condition was ‘like new", with no surface corrosion on either line." Sandia National... See #1.
|
Hot Dip Galvanizing Design Considerations
...} #submenu5 li a { background-color:#006666; } Hot Dip Galvanizing Design Considerations Protection against corrosion begins on the drawing board. No matter what corrosion protection system is used, it must be factored into the design of the product. Once the decision has been made to use hot dip galvanizing to provide corrosion protection... See #2.
|
Engineering Specifications -- Baltimore Aircoil Company FXV Closed Circuit Cooling Towers
1 Corrosion Resistant Construction: Unless otherwise noted in this specification, all steel panels and structural members shall be protected with the BALTIBOND® Corrosion Protection System. The system shall consist of G-235 (Z700 metric) hot-dip galvanized steel prepared in a four-step (clean, pre-treat, rinse, dry) process with an... See #3.
|
• Add your web page here?
Please send your link and description (at least 20 words) to addpage@cadinfo.net. Placement is free. We reserve the right to refuse or modify your contribution.
• Have your web page removed?
Please send a note to removepage@cadinfo.net. After verifying your request we'll remove all references to and images of your site.
| |
|
