Georgia-Pacific Chemical - Product Lines - Pine Chemicals
- Adhesives and Sealants
...90% min rosin, color gardner 6 max, ACV 172 min. E-mail Us 404-652-4340 Literature LYTOR ® 105 A proprietary, highly disproportionated tall oil rosin designed for use as an emulsifier in the polymerization of synthetic rubbers. Typical properties include ACV 170, rosin acids ~87%, fatty acid ~3.5%, color gardner 8 max. E-mail Us 404-652-4340... See #1.
Georgia-Pacific Chemical - Product Lines - Pine Chemicals
- Adhesives and Sealants
...90% min rosin, color gardner 6 max, ACV 172 min. E-mail Us 404-652-4340 Literature LYTOR ® 105 A proprietary, highly disproportionated tall oil rosin designed for use as an emulsifier in the polymerization of synthetic rubbers. Typical properties include ACV 170, rosin acids ~87%, fatty acid ~3.5%, color gardner 8 max. E-mail Us 404-652-4340... See #2.
Acme-Hardesty
...Coconut Fatty Acid Anionic, Nonionic, and Cationic Surfactants, Amphoterics Erucic Acid Anionic and Nonionic Surfactants Glycerine 99.7% Intermediate Hydrogenated Castor Oil Emulsifier Lauric Acid Anionic and Nonionic Surfactants Lauryl Alcohol Fatty Alcohol Sulfates & Ethoxylates Myristic Acid Anionic and Nonionic Surfactants for Chemicals, ... See #3.
|
Case Histories: Bulk Bag Discharger: T-0933
...where it dissolves into the ammonium nitrate. The resulting solution is transferred to a blend table, where it is combined with a mixture of four fuels, one of which serves as an emulsifier. The emulsification is pumped to a holding tank, and later pumped to another area of the plant, where solid ammonium nitrate prills are added via an auger. See #4.
|
ParaChem.com
...for cleaners, emulsion polymerization, penetrant Stanfax 1033 (2) 32 Ammonium Octyl/Decyl Industrial, high foaming ether sulfate agent Stanfax 967 30 Sodium Decyl Sulfate Emulsifier dispersant, wetting agent for industrial and institutional cleaners Stanfax 1087 40 Stanfax 1024 (1) 25 Sodium Laureth Sulfate Industrial cleaners, light... See #5.
Brite Products
If dipping or spraying the alkaline solution, the temperature should range between 140 and 185 degrees F. For newly galvanized surfaces, a water-based emulsifier can be used to remove contaminants. After cleaning, thoroughly rinse the surface with hot water and allow to dry completely. Solvent Cleaning - Mineral... See #6.
|
