Please find below a selection of relevant articles from AEC companies and organizations, including North American Bullet Proof, Door and Hardware Systems Inc., for hollow metal frame.
Add your web page here?
Please send your link and description (at least 20 words) to addpage@cadinfo.net. Placement is free. We reserve the right to refuse or modify your contribution.
DHSI - Inspection Forms
...door manufacturers state that shimming or sanding, if necessary, is standard installation procedure. AWI allows the manufacturer +/- 1/32" on hardware location mortise. On hollow metal frame or hollow metal door - Are tap plates on door or frame welded in on an angle? 1.3 Hinge should be tight in the door mortise. NO GAP ALLOWED. Pilot holes... See #1.
NABP Product 3
...in the several performance levels, sizes and configurations. (See the product selector chart below). Custom sizes are available upon request. A 12 gauge prime finished hollow metal frame and continuous gear hinge is used on the WDR Series door to provide reliability. The frames are available in standard bolt-in style or clamp style.... See #2.
|
• Add your web page here?
Please send your link and description (at least 20 words) to addpage@cadinfo.net. Placement is free. We reserve the right to refuse or modify your contribution.
• Have your web page removed?
Please send a note to removepage@cadinfo.net. After verifying your request we'll remove all references to and images of your site.
| |
|
