Martin Senour design and painting advice
...(for clean-up) Caulking gun and tubes of caulk (for long gaps in surfaces that can be affected by moisture) Drop cloth Hammer (for closing the paint can) A ladder or step stool Masking tape (special painter's masking tape is wider, with adhesive on only half of one side. This allows the paper to form a kind of flange, protecting the additional... See #5.
Bondit Construction Chemicals: Product Details
...three-component system supplied in pre-measured units of base, reactor and filler. Mix the base and reactor thoroughly, add the filler and mix to get a uniform consistency paste. Masking tape may be fixed on either side of the joint to avoid stains on the tile and the tape be removed after two hours of filling. Dosage Coverage depends on the... See #6.
Smith Flooring - Quality You Can Stand On.
...the entire boards, being careful not to build additional finish coats on surrounding strips. Read application directions. Taping the perimeter of the area with a quality release masking tape is helpful. Allow ample drying time. After the finish is dry remove tape. CAUTION: Don't attempt this if you have an older varnish. The older finishes... See #7.
Treadmaster Floor Preparation Guide
Make certain the covering has not moved. Rolling may be repeated some time later, but again, take care not to move the surface. To facilitate cleaning, it is recommended that a masking tape be laid over the joins and this is removed before hardening. Although curing / hardening will commence after approximately 45 - 60 minutes, depending on... See #8.
ARS-3 (15MB) Reflective, Protective or Architectural Coloe Coating Systems
for Modified...
...into the building or the existing roofing system. A tape test should be used to determine acceptability of cleaned surface for coating application. This is done by applying masking tape to the surface to be coated, and then peeling off the tape. If the adhesive side of the tape shows contaminants that will interfere with the adhesion of... See #9.
CleanigPoly
...Products) Palmolive Liquid™(Colgate Palmolive) Graffiti Removal • Butyl Cellosolve (For removal of paints, marking pens, lipstick, etc.) • The use of masking tape, adhesive tape or lint removal tool s work well for lifting off old weathered paints. • To remove labels, stickers, etc., the use of kerosenes, naphtha, ... See #10.
SAFTI-TRAX MAT™
3. Place mat(s) onto the application surface. 4. Mask off the area around the mat(s) with a good-quality duct tape, which bonds to the concrete better than regular masking tape. 5. Remove the mat(s) from the working area, remembering the exact position they were in. 6. Place the adhesive in the caulk gun, cut of 1/4" to 1/2" of... See #11.
from Cabinetmart Inc.
Jars for storing screws & small parts. Driver Bits Utility Knives & Blades Drill Bits Knobs & Pulls Files Hand Tools Cleaners Screwdrivers Masking Tape Stretch Wrap Packing Tape Small Parts Jars Safety Supplies VIEW BASKET SIGN IN SEARCH HOME WHAT'S HOT FAQ SHIPPING GUARANTEE Cabinetmart Inc. | Legal and... See #12.
IPM Group: Service & Support: Homeowners
For example... For any painting project, the following items might be needed: For masking surfaces not being painted Drop cloths/polyethylene film Masking tape Paint shields/edging tools Newspaper Masking paper To protect the painter Goggles/safety glasses Dust masks Respirator Rubber gloves Cotton gloves Painter's... See #13.
Granwax Products Ltd - Games Line Paint
...Buy Online Environment Games Line Paint Games line paint is available in 1 litre packs in the following colours: Red White Black Yellow Orange Green Blue Also available: Line Masking Tape sales | contact | register | Copyright Granwax Products Ltd 1999-2006. Design by redjuly.com. See #14.
Kelly-Moore Paints - The Painter's Paint Store - (Frequently Asked Questions)
For example... For any painting project, the following items might be needed: For masking surfaces not being painted Drop cloths/polyethylene film Masking tape Paint shields/edging tools Newspaper Masking paper To protect the painter Goggles/safety glasses Dust masks. See #15.
Paper Tapes Home
...tapes should be applied at between +10°C and +40°C. Surfaces should be as clean and dry as possible with any loose material and dust removed as far as possible. AT6300 60°C Paper Masking Tape AT6301 80°C Paper Masking Tape. See #16.
| 
