DiversiFoam Products - Company Information
EPS board made from molded block is relatively low cost, offering the highest R-value ( insulation capability) per dollar of any of the company's product offerings. Extruded polystyrene board, while more expensive than EPS, offers higher R-value per inch, higher compressive strength with less moisture absorption. Rigid urethane offers even... See #2.
Engineering and Architectural Specifications (Print)
...specified) Mainfeed to panel from existing power source is not included unless noted on quotation. WALL SECTIONS: Panels shall be 2" or 4" nominal thickness - polystyrene board core with 1/8" hardboard or 1/2" gypsum on interior and exterior surfaces. To accept 2" or 4" aluminum framing. Panel finish to... See #3.
Elastizell - Products: Insulated Concrete Roof Decks - Information
Hole spacings and board dimensions are shown in Figure 3. Proper board placement requires the long side perpendicular to corrugations, with end joints staggered. The polystyrene board must be recognized in a current ICBO ES or National Evaluation Service report for the thickness used. 2.2.3 B[1 1/2 - inch (38 mm)] Decks: The steel... See #4.
Dyplast Holey-Board Roof Insulation
eps board, eps holey-board, eps insulation, eps roof insulation, eps sheathing, expanded polystyrene, expanded polystyrene board, expanded polystyrene insulation, expanded polystyrene sheathing, flat roof insulation, holey-board, holey-board insulation, light-weight concrete roof insulation, rigid roof insulation, roof insulation, styrofoam... See #5.
About EIFS
Your first choice when ever vandalism, heavy use and abuse are common. When mechanically fastened to extruded or high density expanded polystyrene board, it creates an energy efficient insulation with extra-ordinary resistance to ultra high impact damage. Click here for the Plekote System Technical Data... See #6.
|
