SSTB® Anchor Bolts
...the structural design is based on concrete no greater than 2500 psi (UBC Section 1701.5.1 and IBC Section 1704.4). Unless otherwise noted, do NOT install where: (a) a horizontal cold joint exists within the embedment depth between the slab and foundation wall or footing beneath, unless provisions are made to transfer the load, or the slab... See #2.
Accessories(FlexTube) - Urethane Grout Technologies - PYCOSA Chemicals, Inc
...Emenu("access"); topindex("Flextube", "access"); Print Format Data Sheet Description Urethane Flex Tube is a very economical solution to prevent water infiltration in cold joints. The Urethane Flex Tube is placed on the cold joint during the construction. The cement particles can not penetrate through the walls of the tube, due... See #3.
Form-A-Key Products - Technical Data Key-Loc Joint is a galvanized steel cold joint left permanently in concrete slabs
Key-Loc Joint is a galvanized steel cold joint left permanently in concrete slabs, works as an effective load transfer device at slab joints, serves as a contraction joint, an edge form and screeding rail during... See #4.
| 
