Please find below a selection of relevant articles from AEC companies and organizations, including Allied Modular Building Systems, Inc., Marc Refrigeration Manufacturing, Inc. and Sun Frost, for pane.
Add your web page here?
Please send your link and description (at least 20 words) to addpage@cadinfo.net. Placement is free. We reserve the right to refuse or modify your contribution.
Allied Modular Building Systems, Inc. -Building Our Way Into Your Future with quality...
...concealed electrical shall be encased in flexible aluminum or steel conduit. All exposed conduit shall be encased in steel conduit. All components shall be wired to a load center /sub panel or one location within the proposed structure. All wiring to the load center / Sub panel shall be wired to breakers that are also provided. All wiring must be field-tested. See #1.
|
MDL Series Display Case
...of Decor Matched Exteriors, FREE!!! You can't name a color that is not available: brilliant blue, green marble, honey maple, black.... Marc offers hundreds of decor matching exterior panels at no extra cost! Call us with your choice. We'll match it from our enormous collection of finishes, FREE!!! Quality Construction Insures Dependable Service... See #2.
|
|
Extreme Efficiency
...to enlarge My house incorporates 70 square feet (6.5 m2) of south-facing windows, and a sunspace entryway that has an additional 70 square feet of glazing. The sunspace has single-pane windows, which only cut out about 10 percent of the incident solar radiation. The fraction of incident solar radiation that passes through a window is called... See #3.
|
|
Heat Reduction, Reduce Glare, Health and Safety Regulations, UK
...be of safety material or be protected against breakage -ie, it should not break on impact or should break safely. Safety glazing material must meet BS 6206 Class B in doors and side panels over 900mm wide, and Class C in those less than 900mm wide. Low level glazing must meet a minimum of BS 6206 Class C. This entails the use of laminated, ... See #4.
|
Rea Metal Windows Ltd
...the contract to replace all 500 windows by main contractor Wates. The great majority of the windows were sub-divided in 36No. Individual double glazed units, incorporating an 18 pane horizontal pivot and a 18 pane fixed light. Disclaimer. See #5.
|
• Add your web page here?
Please send your link and description (at least 20 words) to addpage@cadinfo.net. Placement is free. We reserve the right to refuse or modify your contribution.
• Have your web page removed?
Please send a note to removepage@cadinfo.net. After verifying your request we'll remove all references to and images of your site.
| |
|
