AEC-CADinfo
Free Engineering Publications
Computer-Aided Design
Architecture / Engineering / Construction
News and Information on AEC-CADinfo

Directories
 
AEC Software News
 
 
 
Search
Google
web this site
News/Publications
 
Services
 
 
 

You are here:  Homepage  >  gravity  >  specific gravity

Specific gravity

Isothane Polyurea Range - Armour - Flex PW
...secs Cure Return to service in 60 minutes Typical Properties ARMOUR - FLEX PW Resin ARMOUR - FLEX PW H Appearance Viscous liquid Viscous liquid Viscosity @ 25º C 600 cps 800 cps Specific Gravity @ 25º C 1.05 1.15 Water Content.01% Installation: The following is brief, general guidance only. We recommend reference to SSPC specifications for correct preparation. See #1.



All-Flo | Pump Selection Guide
...maximum flow rate – 255 GPM (965 l/m) For optimal efficiency, the pump should operate at 50% to 60% of the maximum flow rate. Notes on Suction Lift: • Viscosity and specific gravity reduce suction lift – position pump close to fluid source. • Max-Pass™ valves found in Specialty Performance and Performance Plus increase... See #2.

Codes and Testing - The Nailer
...get MEDICAL ATTENTION IMMEDIATELY SECTION VI – PHYSICAL DATA BOILING POINT: Not applicable MELTING POINT: Crystalline, 275-284oF (125-140oC) VAPOR PRESSURE: Not applicable SPECIFIC GRAVITY: 0.941 – 0.980 g/cc VAPOR DENSITY (AIR=1): Not applicable SOLUBILITY IN WATER: Insoluble APPEARANCE AND ODOR: Approximately 3/8” white to opaque... See #3.

Saftron.com
...Safety Railings and Industrial Railings conform to OSHA regulations and meet or exceed all building code requirements. Typical Physical Properties Flame Spread Class A ASTM E-84 Specific Gravity 1.47 ASTM D-792 Comprehensive Strength (PSI) 8, 100 ASTM D-695 Flexural Strength (PSI) 12, 100 ASTM D-790 Flexural Modulus (PSI) 400, 000 ASTM D-790 Tensile... See #4.

Roechling-Glastic Composites: Grade 1120 Corrosion-Resistant Panels
...@ 130° C Psi ASTM D790 13, 100 Compressive Strength Psi ASTM D695 33, 100 IZOD Impact Strength (Notched) Ft. Lb./in. ASTM D256 8.9 Water Absorption % by wgt. ASTM D570 0.4 Specific Gravity ASTM D792 1.81 FLAME & SMOKE DATA Flames Spread – United States Calculation E84 15 Flames Spread – Canadian Calculation E84 20 Smoke Developed... See #5.

www.port-security-barrier.com
...rolls Buckles: 100/box Specifications: Property Specifications ASTM Test Method PILE PRIMER Dielectric Strength: 100volt/mil D-149 Flash Point: 350 ° F (177 ° C) D-92 Specific Gravity:.90 (at 77 ° F / 25 ° C) D-3505 Color: Brown x Application Temperature: 0 ° -100 ° F(-18 ° -38 ° C) x Service Temperature: -20... See #6.

Acrylic Ad-Mix 101 MSDS
...APPEARANCE/PHYSICAL DESCRIPTION: Milky white liquid, slight ammonia odor pH AS IS: 9 to 10 BOILING POINT: 212°F MELTING POINT: 32°F SOLUBILITY IN WATER: Dilutable SPECIFIC GRAVITY (Water=1): 1.0 to 1.1 BULK DENSITY: 8.1 lbs./gal. VOLATILES: 75% (water) VAPOR PRESSURE (mmHg): 17 @ 20°C FIRE & EXPLOSION HAZARD DATA Flash... See #7.

Berg Chilling System Inc. - Fluids And Pressure
0361 lb per cu in. (1 cu ft contains 1, 728 cu in., and 62.4/1, 728 = 0.0361). The densities of some other common substances are listed in Fig.3-5. Substance Density, lb/cu ft Specific Gravity Water (pure) 62.4 1.0 Ammonia (liq. 60 deg. F) 38.5 0.62 Aluminum 168 2.7 Brass 530 8.5 Brick (common) 112 1.8 Copper 560 8.98 Cork 15 0.24 Gasoline 41. See #8.

Dictionary of Terms - Bell & Gossett world leader in supplying the Heating/Ventilating/Ai...
...Reducing Valve Re-Evaporation Refrigeration, Ton of Relative Humidity Return Mains Reverse-Return System (Hot Water) Safety Factor Sensible Heat Skimming Sparge Tube Specific Gravity Specific Heat Split System Square Foot of Heating Surface Static Discharge Head Static Head Static Pressure Static Suction Head Static Suction Lift Steam... See #9.

Anti-graffiti Paint.
Typical Properties • Appearance Semi-transparent/Clear Liquid • Solvent White Spirit • Viscosity 2.5 to 3 Poise • Solids 34 to 36 % by Weight • Specific Gravity 0.85 to 0.88 • Shelf Life 12 months in unopened container • UV Resistance Excellent Other Data: • Supplied in 5 and 20 litre containers... See #10.

BK7 Material Data Sheet
5–6.5 5.5–6.5 5 9 Microhardness kg/cm 2 9.4 × 10 4 9.4 × 10 4 Knoop Hardness (100g load) kg/mm 2 605 615 520 481 1525–2000 Density g/cm 3 2.203 2.203 Specific Gravity 2.203 2.201 2.53 2.23 3.98 Compressive Strength kg/cm 2 1.13 × 10 4 1.13 × 10 4 2.04 × 10 4 Tensile Strength kg/cm 2 500 500 282 7000 Torsional Strength kg/cm 2 300 300 1. See #11.

Cathedral Stone - Application Procedures
0 fl. oz./lb. HARDENED PHASE Compressive strength 12300 to 14500 psi Tensile bending strength 900 to 1500 psi Tensile strength 700 to 1100 psi Absorption (%) 4.0 to 6.0 Specific gravity 2.1 Data Sheet Downloads Product Data Sheet MSDS Sheet for Jahn M150 Warning Not for internal consumption. Keep out of reach of children and animals. See #12.

Vantage Products Corporation
This space age material is stronger and more durable than many other resin compounds and is considered the lightest among all major plastics. With an extremely low specific gravity, polypropylene has enabled many durable goods to become portable. Personal computers and hand-held calculators have become possible through the advent... See #13.

Custom Equipment Company
...CUSTOMER QUESTIONNAIRE LIQUIDS Product Information: Product: Liquid Paste Product Type: Chemical Food Edible Oil Adhesive Other Liquid: Actual Product: MSDS: Specific Gravity: WT per Gallon Viscosity: Low Medium High Hazardous: Yes No Fill Temp: Current Packaging of Potential Customer: Liquids: Plastic Drum Steel Drum Fiber... See #14.

Flame Retardant Additives
Flame Retardant Additives Paranol FR Solids pH Viscosity Specific Gravity Description FRD-002 55 9 5000 14 Antimony/Decabrome dispersion FRS-003 35 8.5 2000 14 Environmentally Safe Liquid FR system FRD-004 65 8.5 4000 13 Decabromodiphenyl oxide dispersion FRD-005 35 8.5 2000 14 Environmentally Safe Liquid FR system FRD-006 55 8. See #15.

Finishes
The consumer can feel good about buying a powder-coated product, which is ENVIRONMENTALLY RESPONSIBLE. Typical Performance Properties TEST METHOD RESULTS Specific Gravity Calculated 1.2-1.7 Gloss (60°) ASTM D 523 20-100 units Direct Impact Resistance ASTM D 2794 Up to 160 in.-lbs. Flexibility ASTM D 522, Method B 1/8"... See #16.



1: http://www.isothane.com [c914187]
2: http://www.all-flo.com [c899441]
3: http://www.thenailer.com [c911728]
4: http://www.saftron.com [c897523]
5: http://www.glastic.com [c1294884]
6: http://www.port-security-barrier.com [c920440]
7: http://www.larsenproducts.com [c902776]
8: http://www.berg-group.com [c1299502]
9: http://www.bellgossett.com [c907232]
10: http://www.intumescent.com [c916741]
11: http://www.glassdynamicsllc.com [c917977]
12: http://www.jahnmortars.com [c902652]
13: http://www.VantageProducts.com [c1298919]
14: http://www.custommhs.com [c742706]
15: http://www.parachem.com [c910339]
16: http://www.gsiskylights.com [c804470]

More than 16 companies and organizations in Architecture, Engineering and Construction offer information about specific gravity on their websites. The most relevant pages are shown above. To find the remaining references please use the search tool in the left column.

 





Copyright © 2004-2008 Actiosoft / Digital Business Media: compilation of news, articles, white papers and web references concerning specific gravity.