Please find below a selection of relevant articles from AEC companies and organizations, including Sunvent Industries, White Aluminum Fabrication, Inc., for temper.
Add your web page here?
Please send your link and description (at least 20 words) to addpage@cadinfo.net. Placement is free. We reserve the right to refuse or modify your contribution.
SECTION 05720 ALUMINUM HANDRAILS AND RAILINGS: SAMPLE SPECIFICATION
...and other materials from direct contact with incompatible materials. D. Thermal Movements: Allow for thermal movement resulting from the following maximum change (range) in ambient temperature in the design, fabrication, and installation of handrails and railings to prevent buckling, opening up of joints, overstressing of components, connections... See #1.
Dryer Vent Louver Vents Louvered Vents
...Section 01630 - Product Substitution Procedures. 2.2 MATERIALS A. Extruded aluminum: [0.125 inch] [3 mm] minimum thickness extruded aluminum complying with ASTM B221, Alloy 6063, Temper T-5. B. Sheet aluminum: [0.063 inch] [16 mm] minimum thickness sheet aluminum sheet complying with ASTM B209 6063, Temper T-6. C. Fasteners: Type, size, and... See #2.
|
• Add your web page here?
Please send your link and description (at least 20 words) to addpage@cadinfo.net. Placement is free. We reserve the right to refuse or modify your contribution.
• Have your web page removed?
Please send a note to removepage@cadinfo.net. After verifying your request we'll remove all references to and images of your site.
| |
|
